HERCULES CHEMICAL -- SOLDERING PASTE -- 3439-00F004182
===================== Product Identification ===================== Product ID:SOLDERING PASTE MSDS Date:01/01/1987 FSC:3439 NIIN:00F004182 === Responsible Party === Company Name:HERCULES CHEMICAL/NEW YORK, NY 10018 Emergency Phone Num:(212) 869-4330 CAGE:84794 === Contractor Identification === Company Name:HERCULES CHEMICAL CO INC Address:111 SOUTH STREET(OLD IS 29 W 38 ST) Box:City:PASSAIC State:NJ ZIP:07055-7398 Country:US Phone:973-778-5000 CAGE:84794 ============= Composition/Information on Ingredients ============= Ingred Name:ZINC CHLORIDE (SARA III) CAS:7646-85-7 RTECS #:ZH1400000 OSHA PEL:1 MG/M3/2 STEL ACGIH TLV:1 MG/M3/2STEL FUME93 EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS ===================== Hazards Identification ===================== Effects of Overexposure:ZINC CHLORIDE CONTACT, THERE ARE INCONCLUSIVE UNVERIFIED REPORTS OF HUMAN SENSITIZATION. ===================== Fire Fighting Measures ===================== Flash Point:580F (COC) Extinguishing Media:DRY CHEMICAL, CO2, WATER FOG Fire Fighting Procedures:DON'T ENTER CONFINED FIRE SPACE W/OUT PROPER EQUIPMENT. Unusual Fire/Explosion Hazard:VAPORS WHICH CAN BURN/EXPLOSIVE IN CONFINED AREAS. ================== Accidental Release Measures ================== Spill Release Procedures:FLUSH WITH LARGE QUANTITIES OF WATER AND PICK UP WITH ABSORBING MATERIALS. ====================== Handling and Storage ====================== Handling and Storage Precautions:WASH THOROUGHLY AFTER HANDLING. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NOT REQUIRED FOR NORMAL USE. Ventilation:MECHANICAL: EXHAUST FAN Protective Gloves:RUBBER Eye Protection:SAFETY GOGGLES Supplemental Safety and Health MSDS DATE: 18 JUN 1986. MELTING POINT: 120-140F. ================== Physical/Chemical Properties ================== Spec Gravity:0.95 Solubility in Water:SLIGHT Appearance and Odor:AMBER TO BROWN COLOR PASTE. ODOR NONE ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES CYANIDES/SULFIDE SALTS Stability Condition to Avoid:AVOID CONTACT W/CONCENTRATED ALKALIES. Hazardous Decomposition Products:WILL NOT OCCUR EXCEPT AT HIGH TEMP. ==================== Disposal Considerations ==================== Waste Disposal Methods:LANDFILL; TO DISPOSE LARGE QUANTITIES, COMPLY WITH FEDERAL, STATE AND LOCAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.