QUIKRETE COMPANIES -- CONCRETE ACRYLIC FORTIFIER CONCENTRATED, 8611  -- 5610-00N080768
<pre>=====================  Product Identification  =====================

Product ID:CONCRETE ACRYLIC FORTIFIER CONCENTRATED, 8611
MSDS Date:10/01/1996
FSC:5610
NIIN:00N080768
=== Responsible Party ===
Company Name:QUIKRETE COMPANIES
Address:2987 CLAIRMONT RD SUITE 500
City:ATLANTA
State:GA
ZIP:30329
Country:US
Info Phone Num:770-216-9580
Emergency Phone Num:770-216-9580
CAGE:IO174
=== Contractor Identification ===
Company Name:QUIKRETE COMPANIES
Address:1790 CENTURY CIRCLE
Box:City:ATLANTA
State:GA
ZIP:30345
Country:US
Phone:404-634-9100
CAGE:IO174

=============  Composition/Information on Ingredients  =============

Ingred Name:ACRYLIC POLYMER
CAS:25068-63-7
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:AMMONIA (SARA 302/313) (CERCLA)
CAS:7664-41-7
RTECS #:BO0875000
OSHA PEL:50 PPM
ACGIH TLV:25 PPM;35 STEL
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION:VAPOR OR MIST CAN CAUSE
    HEADACHE, NAUSEA AND IRRITATION OF THE NOSE, THROAT AND LUNGS. SKIN
    CONTACT:IRRITATING UPON REPEATED OR PROLONGED CONTACT. EYE
    CONTACT:SLIGHTLY IRRITATING.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:MOVE SUBJECT TO FRESH AIR.
    EYES:FLUSH W/LARGE AMOUNT OF WATER FOR AT LEAST 15 MINUTES. SEE MD
    IF IRRITATION PERSISTS. SKIN:WASH AFFECTED AREAS W/SOAP & WATER.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONCOMBUSTIBLE AND NOT EXPLOSIVE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:IF MATERIAL IS RELS/SPILLED, DAM UP TO LIM
    SPREADING. MOP UP/ABSORB ON INERT MATL & PLACE IN CNTNRS. IF SPILL
    OCCURS IN ENCLSD AREA, VENTILATE. POLYMER MAY BE SEPARATED FROM
    WATER BY ADDN OF ALUM & FE RRIC CHLORIDE. NOTE:SPILLED EMULSION
    IS(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NORMAL CLEANLINESS SHOULD BE OBSERVED.
    STORE IN A COOL PLACE, AVOID FREEZING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:REMOVE SATURATED CLOTHING & WASH CONTACTED SKIN
    AREAS W/SOAP & WATER.
Supplemental Safety and Health
SPILL PROC:VERY SLIPPERY. USE CARE TO AVOID FALLS. LATEX WILL LEAVE A
    FILM ON DRYING.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
pH:9.5-10
Solubility in Water:DILUTABLE
Appearance and Odor:MILKY WHITE LIQUID W/SLIGHT AMMONIACAL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS . FOR LARGE QTYS, PLACE IN SETTLING POND & ADD FERRIC
    CHLORIDE & LIME. DECANT WATER. DISPOSE OF SOLID IN LANDFILL.
    EMULSION CAN BE INCIN ERATED DIRECTLY UNDER APPROPIRATE CONDITIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.