BORDEN CHEMICAL CO -- KRYLON 1310 DULLING SPRAY(REMOVEABLE) -- 8010-00-582-5383
=====================  Product Identification  =====================

Product ID:KRYLON 1310 DULLING SPRAY(REMOVEABLE)
MSDS Date:12/04/1986
FSC:8010
NIIN:00-582-5383
=== Responsible Party ===
Company Name:BORDEN CHEMICAL CO
Address:180 E BOARD STREET
City:COLUMBUS
State:OH
ZIP:43215-3705
Info Phone Num:613-431-6600
Emergency Phone Num:613-431-6600
CAGE:86142
=== Contractor Identification ===
Company Name:BORDEN CHEMICAL CO
Address:180 E BROAD ST
Box:City:COLUMBUS
State:OH
ZIP:43215-3705
Country:US
Phone:614-225-6124
CAGE:86142

=============  Composition/Information on Ingredients  =============

Ingred Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 15-30%
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

Ingred Name:METHYL CHLOROFORM (1,1,1-TRICHLOROETHANE)  (SARA III)
CAS:71-55-6
RTECS #:KJ2975000
Fraction by Wt: 5-15%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:350 PPM
ACGIH TLV:350 PPM/450STEL;9394
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ozone Depleting Chemical:1

Ingred Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 5-15%
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9192

Ingred Name:ISOBUTANE
CAS:75-28-5
RTECS #:TZ4300000
Fraction by Wt: 15-30%

Ingred Name:N-HEPTANE
CAS:142-82-5
RTECS #:MI7700000
Fraction by Wt: 15-30%
OSHA PEL:500 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9293

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:ACUTE:IRRITATION OF EYES.SKIN AND
    RESPIRATORY TRACT;NOSE,THROAT AND LUNGS IRRITATION. CHRONIC:NO DATA
    AVAILABLE.
Effects of Overexposure:SEE HEALTH HAZARDS DATA>
Medical Cond Aggravated by Exposure:NO DATA AVAILABLE

=======================  First Aid Measures  =======================

First Aid:SKIN AND EYES:FLUSH WITH PLENTY OF WATER FOR ABOUT 15
    MINUTES;CALL A PHYSICIAN> INHALATION:REMOVE TO FRESH AIR.CALL A
    DOCTOR. INGESTION:CALL A PHYSICIAN IMMEDIATELY.OR CONSULT POISON
    CONTROL CENTER.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:DRY CHEMOCAL,FOAM,CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN AN ENCLOSED
    AREA.WATER MAY BE USED TO KEEP FIRE-EXPOSED CONTAINERS COOL
Unusual Fire/Explosion Hazard:CONTENTS UNDER PR4SSURE.EXPOSURE TO HIGH
    TEMPERATURE MAY CAUSE BURSTING;AVOID EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE PERSONAL PROTECTIVE;ELIMATE ALL IGNITION
    SOURCES;SOAK UP WITH ABSORBENT MATERIAL AND REMOVE TO A CHEMICA
    DISPOSAL AREA.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE AT TEMPERATURE OVER
    120F:USE PRECAUTION AS DIRECTED;WASH THOROUGHLY AFTER HANDLING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC
    VAPORS/MIST IF ABOVE PEL/TLV.
Ventilation:LOCAL EXHAUST TO MAINTAIN PEL/TLV:USE WITH AN ADEQUATE
    VENTILATION.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:FULL PROTECTION:EYE-WASH FOUNTAIN.
Work Hygienic Practices:AVOID CONTACT WITH EYES AND SKIN:DO NOT BREATH
    VAPORS/MIST.WASH THOROUGHLY AFTER EACH USE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:V3
Vapor Pres:50-PSIG
Vapor Density:>1.0
Spec Gravity:<1.0
pH:/K
Evaporation Rate & Reference:>1.0 (BUTYL ACETATE=1)
Appearance and Odor:AERSOL SPRAY (SEMI-DRYING:FOR MOVIE,TV,STILL
    PHOTOGRAPHY
Percent Volatiles by Volume:97.0 N

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID OXIDIZER
Stability Condition to Avoid:EXTREME HEAT
Hazardous Decomposition Products:OXIDES OF CARBON.

====================  Disposal Considerations  ====================

Waste Disposal Methods:EDO NOT INCINERATE:DISPOSE OF IN ACCORDANCE WITH
    LOCAL,STATE AND FEDERAL REGULATION:DO NOT CUT,PUNCTURE OR WELD ON
    OR NEARBY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.