KANO LABORATORIES INC -- KROIL  -- 9150-00-800-7997
<pre>=====================  Product Identification  =====================

Product ID:KROIL
MSDS Date:05/08/1992
FSC:9150
NIIN:00-800-7997
=== Responsible Party ===
Company Name:KANO LABORATORIES INC
Address:1000 S THOMPSON LANE
City:NASHVILLE
State:TN
ZIP:37211-2627
Country:US
Info Phone Num:615-833-4101
Emergency Phone Num:615-833-4101
Preparer's Name:P R ZIMMERMAN
CAGE:13868
=== Contractor Identification ===
Company Name:KANO LABORATORIES, INC.
Address:1000 S. THOMPSON LANE
Box:City:NASHVILLE
State:TN
ZIP:37211-2627
Country:US
Phone:615-833-4101
CAGE:13868

=============  Composition/Information on Ingredients  =============

Ingred Name:NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE: BURNING AND IRRITATION. SKIN:
    DRYNESS, PROLONGED EXPOSURE MAY CAUSE DERMATITIS. INHAL: MAY CAUSE
    HEADACHE, DIZZINESS, ANESTHESIA, NAUSEA AND UPPER RESPIRATORY
    IRRITATION. INGEST: MAY CAUSE LUNG I RRITATION, NAUSEA, VOMITING
    AND DIARRHEA. HARMFUL OR FATAL IF SWALLOWED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:IMMED FLUSH W/LG AMT OF H*2O FOR @ LST 15 MIN. SKIN:WASH
    W/SOAP/MILD H*2O. APPLY SKIN CREAM. INHAL:REMOVE TO FRESH AIR. IF
    BRTHG IS DFCLT ADMINISTER O*2. IF BREATHING HAS STOPPED GIVE ARTF
    RESP. G ET MED ATTN. INGEST: DO NOT INDUCE VOMIT, CALL PHYS IMMED.
    MINUTE AMOUNT ASPIRATED INTO LUNGS DURING INGEST MAY CAUSE SEVERE
    PULMONARY DAMAGE. DO NOT ADMINISTER EPINEPHRINE OR ADRENALINE.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:130F,54C
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . USUAL PROCEDURE FOR SOLVENTS. TREAT AS
    COMBUSTIBLE. DO NOT USE WATER.
Unusual Fire/Explosion Hazard:NEVER USE WELDING OR CUTTING TORCH
    ON/NEAR CANS/DRUMS. DO NOT MIX/STORE WITH STRONG OXIDANTS. STORE @
    ROOM TEMPERATURE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE UP IMMED WITH ABSORBENT RAGS, SWEEPING
    COMPOUND OR OTHER ABSORBENT MATERIAL, REMOVE OR EXTINGUISH ALL
    FLAMES AND SPARKS. DO NOT FLUSH INTO SEWER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM EXCESSIVE HEAT, SPARKS
    AND OPEN FLAME. DO NOT TAKE INTERNALLY. DO NOT LEAVE CONTR OPEN.
    STORE IN COOL AREA.
Other Precautions:USE WITH PROPER VENTILATION. WEARING CONTACT LENSES
    IS NOT ADVISABLE. IF SWALLOWED CAN ENTER INTO LUNGS AND MAY CAUSE
    CHEM PNEUM. DO NOT ADMINISTER EPINEPHRINE OR ADRENALIN. KEEP AWAY
    FROM CHILDREN AN D ANIMALS. DO NOT PUNCTURE CONTR.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR FOR VAPORS IF
    DESIRED.
Ventilation:LOCAL EXHAUST:NORMAL LOCAL EXHAUST SYSTEM. MECHANICAL(GEN):
    NORMAL VENTILATION IS SUFFICIENT.
Protective Gloves:CHEMICALLY RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLE .
Other Protective Equipment:NONE NEEDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:250F,121C
Vapor Pres:3
Spec Gravity:.88
pH:6.0
Evaporation Rate &amp; Reference:<1(BUTYL ACETATE=1)
Solubility in Water:NIL
Appearance and Odor:LIQUID, SLIGHT REDDISH COLOR, PLEASANT ODOR.
Percent Volatiles by Volume:60

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, STRONG OXIDANTS.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN PRESENCE OF
    AIR MAY YIELD CARBON MONOXIDE AND/OR CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:BURY SATURATED ABSORBENT IN APPROVED LANDFILL.
    DISPOSE OF AS ANY COMBUSTION FUEL IN ACCORDANCE WITH LOCAL, STATE
    AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.