=====================  Product Identification  =====================

Product ID:17012 KRYLON INTERIOR ENAMEL METALLIC
MSDS Date:02/04/1987
FSC:8010
NIIN:00D004640
MSDS Number: BYSLM
=== Responsible Party ===
Company Name:BORDEN INC/CHEMICAL DIV KRYLON DEPT
Address:630 E WASHINGTON
Box:390
City:NORRISTOWN
State:PA
ZIP:19404
Country:US
Info Phone Num:800-832-2541
Emergency Phone Num:216-292-7400
CAGE:87187
=== Contractor Identification ===
Company Name:KRYLON PRODUCTS
Address:31500 SOLON ROAD
Box:City:SOLON
State:OH
ZIP:44139
Country:US
Phone:800-832-2541/216-566-2917
CAGE:87187
Company Name:SAX ARTS & CRAFTS SUB OF BEATRICE COMPANIES INC
Address:2405 S CALHOUN RD
Box:City:NEW BERLIN
State:WI
ZIP:53151
Country:US
Phone:262-784-6880
CAGE:26290

=============  Composition/Information on Ingredients  =============

Ingred Name:ACETONE (SARA 313) (CERCLA)
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 36%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:1000 PPM
ACGIH TLV:750PPM/1000STEL;9495
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 12%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9495

Ingred Name:ISOBUTANE
CAS:75-28-5
RTECS #:TZ4300000
Fraction by Wt: 16%
Other REC Limits:NONE RECOMMENDED

Ingred Name:TOLUENE (SARA 313) (CERCLA)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 10%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:200 PPM; Z-2
ACGIH TLV:S, 50 PPM; 9495
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:XYLENES (O-,M-,P- ISOMERS) (SARA 313) (CERCLA)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 17%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:100 PPM
ACGIH TLV:100 PPM/150STEL;9495
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGESTION NOT EXPECTED TO
    HARMFUL UNDER NORMAL CONDITIONS OF USE. INHALATION OF VAPORS/MISTS
    MAY CAUSE RESPIRATORY IRRITATION, CNS DEPRESSION, ASPHYXIATION,
    LIVER/KIDNEY DAMAGE. CONTACT MAY CAU SE SKIN AND EYE IRRITATION.
    CHRONIC:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
    OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:INHALED-HEADACHE, DIZZINESS, NAUSEA, VOMITING,
    UNCONSCIOUSNESS, CYANOSIS. SKIN-IRRITATION. EYES-IRRITATION.
    INGESTED-NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:IN ALL CASES GET MEDICAL ATTENTION. EYES-IMMEDIATELY FLUSH
    WITH WATER FOR 15 MINUTES, LIFT LIDS. SKIN-REMOVE CONTAMINATED
    CLOTHES. FLUSH WITH LOTS OF WATER. INHALED-REMOVE TO FRESH AIR.
    ADMINISTER OXY GEN OR ARTIFICIAL RESPIRATION AS NEEDED. INGESTED-IF
    CONSCIOUS, GIVE LOTS OF WATER AND CONTACT POISON CONTROL CENTER OR
    EMERGENCY ROOM.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM. WATER MAY BE
    INEFFECTIVE BUT SHOULD BE USED TO COOL FIRE EXPOSED CONTAINERS.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
    FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:EXTREMELY FLAMMABLE. VAPOR MAY IGNITE
    EXPLOSIVELY. VAPORS MAY TRAVEL TO DISTANT IGNITION SOURCE AND
    FLASHBACK.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. SOAK UP
    WITH INERT ABSORBENT MATERIAL AND REMOVE TO A CHEMICAL DISPOSAL
    AREA. PREVENT ENTRY INTO BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE BELOW 120F
    AND AWAY FROM SOURCES OF IGNITION AND STRONG OXIDIZING AGENTS.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES. AVOID BEATHING
    VAPOR OR MIST.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
    OR AN EMERGENCY OCCURS; WEAR AN MSHA/NIOSH APPROVED RESPIRATOR WITH
    ORGANIC VAPOR CARTRIDGE OR AN AIR-SUPPLIED RESPIRATOR OR SCBA, AS
    REQUIRED. USE IAW  29 CFR 1910.134.
Ventilation:USE EXPLOSION-PROOF ADEQUATE MECHANICAL VENTILATION OR
    LOCAL EXHAUST TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:BUTYL, PVA.
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER. DLA-HMIS:
    EYE WASH STATION & SAFETY SHOWER.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
    DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
SAX ARTS & CRAFTS PART NUMBER: 317-0099. CONTRACT NUMBER
    SP0420-95-PA057.

==================  Physical/Chemical Properties  ==================

HCC:V3
Vapor Pres:50 PSIG
Spec Gravity:<1.0
Evaporation Rate & Reference:>1 (N-BUTYL ACETATE=1)
Solubility in Water:SLIGHT
Appearance and Odor:METALLIC LIQUID IN AEROSOL CAN WITH GAS PROPELLANT.
Percent Volatiles by Volume:89

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER. DLA-HMIS: STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. DLA-HMIS:
    AVOID EXPOSURE TO HIGH TEMPERATURES AND STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:OXIDES OF CARBON.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL ENVIRONMENTAL REGULATIONS. EMPTY CONTAINER MAY CONTAIN
    EXPLSOIVE VAPORS. DO NOT CUT, PUNCTURE OR WELD ON OR NEARBY.
    INCINERATION WILL CAUSE CONTA INER TO BURST VIOLENTLY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.