Material Safety Data Sheet
Diisopropylamine
ACC# 07610
|
Section 1 - Chemical Product and Company Identification |
MSDS Name: Diisopropylamine
Catalog Numbers:
O2412-4
Synonyms:
DIPA; N-(1-Methylethyl)-2-propanamine; Diisopropylamine.
Company Identification:
Fisher Scientific
1 Reagent Lane
Fair Lawn, NJ 07410
For information, call: 201-796-7100
Emergency Number: 201-796-7100
For CHEMTREC assistance, call: 800-424-9300
For International CHEMTREC assistance, call: 703-527-3887
|
Section 2 - Composition, Information on Ingredients
|
| CAS# |
Chemical Name |
Percent |
EINECS/ELINCS |
| 108-18-9 |
Diisopropylamine |
100 | 203-558-5 |
|
Section 3 - Hazards Identification
|
EMERGENCY OVERVIEW
Appearance: colorless liquid. Flash Point: -7 deg C.
Danger! Extremely flammable liquid and vapor.
Vapor may cause flash fire. Causes eye and skin burns. Causes
digestive and respiratory tract burns. May be absorbed through
intact skin. May be harmful if inhaled. May be harmful if swallowed.
Target Organs: Respiratory system, eyes, skin,
mucous membranes.
Potential Health Effects
Eye:
Causes eye burns. Rapidly penetrates eye tissue. Exposure to
concentrations between 25 and 50 ppm may cause disturbances of
vision described as "haziness".
Skin:
Causes skin burns. May be absorbed through the skin.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may cause
nausea and headache.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Chronic
inhalation may cause effects similar to those of acute inhalation.
|
Section 4 - First Aid Measures
|
Eyes:
In case of contact, immediately flush eyes with plenty of water for a
t least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Rapidly penetrates eye tissue. Extensive flushing of the eye is
recommended.
|
Section 5 - Fire Fighting Measures
|
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use water spray to keep fire-exposed containers
cool. Extremely flammable liquid and vapor. Vapor may cause flash
fire. Approach fire from upwind to avoid hazardous vapors and toxic
decomposition products. Vapors are heavier than air and may travel to
a source of ignition and flash back. Vapors can spread along the
ground and collect in low or confined areas.
Extinguishing Media:
Water may be ineffective. Use water spray, dry chemical, "alcohol
resistant" foam, or carbon dioxide.
Flash Point: -7 deg C ( 19.40 deg F)
Autoignition Temperature: 316 deg C ( 600.80 deg F)
Explosion Limits, Lower:0.8%
Upper: 7.1%
NFPA Rating:
(estimated) Health: 3; Flammability: 3; Instability: 0
|
Section 6 - Accidental Release Measures
|
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Provide ventilation. Use water spray to cool and disperse vapors,
protect personnel, and dilute spills to form nonflammable mixtures.
|
Section 7 - Handling and Storage
|
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Ground and bond containers when transferring
material. Do not get in eyes, on skin, or on clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Do not ingest or inhale. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames. Use only with
adequate ventilation. Keep away from heat, sparks and flame.
Storage:
Keep away from sources of ignition. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
containers tightly closed. Isolate from oxidizing materials and
acids.
|
Section 8 - Exposure Controls, Personal Protection
|
Engineering Controls:
Use explosion-proof ventilation equipment. Facilities storing or
utilizing this material should be equipped with an eyewash facility
and a safety shower. Use adequate general or local exhaust
ventilation to keep airborne concentrations below the permissible
exposure limits.
Exposure Limits
| Chemical Name |
ACGIH |
NIOSH |
OSHA - Final PELs |
| Diisopropylamine
|
5 ppm TWA; Skin - potential significant contribution to overall exposure by the cutaneous r oute
|
5 ppm TWA; 20 mg/m3 TWA 200 ppm IDLH
|
5 ppm TWA; 20 mg/m3 TWA
|
OSHA Vacated PELs:
Diisopropylamine:
5 ppm TWA; 20 mg/m3 TWA
Personal Protective Equipment
Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
|
Section 9 - Physical and Chemical Properties
|
Physical State: Liquid
Appearance: colorless
Odor: ammonia-like
pH: alkaline
Vapor Pressure: 60 mm Hg @ 20 deg C
Vapor Density: 3.5
Evaporation Rate:5.8 (butyl acetate=1)
Viscosity: 0.4 mPa s 20 C
Boiling Point: 84 deg C
Freezing/Melting Point:-61 deg C
Decomposition Temperature:Not available.
Solubility: Soluble.
Specific Gravity/Density:0.7200
Molecular Formula:C6H15N
Molecular Weight:101.19
|
Section 10 - Stability and Reactivity
|
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
|
Section 11 - Toxicological Information
|
RTECS#:
CAS# 108-18-9:
IM4025000
LD50/LC50:
CAS# 108-18-9:
Inhalation, mouse:
LC50 = 4200 mg/m3/2H;
Inhalation,
rat: LC50 = 4800 mg/m3/2H;
Oral,
mouse: LD50 = 2120 mg/kg;
Oral,
rabbit: LD50 = 4700 mg/kg;
Oral,
rat: LD50 = 770 mg/kg;
Skin,
rabbit: LD50 = >10 gm/kg;
.
Carcinogenicity:
CAS# 108-18-9:
Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Epidemiology:
Edema of the epithelium of the cornea, generally without
pain, has been produced by amine vapors, causing colored
haloes to be seen around lights, usually in the evening,
after industrial exposure to the vapors of various amines.
Teratogenicity:
No data available.
Reproductive Effects:
No data available.
Mutagenicity:
No data available.
Neurotoxicity:
No data available.
Other Studies:
|
Section 12 - Ecological Information
|
No information available.
|
Section 13 - Disposal Considerations
|
Chemical waste generators must determine whether a discarded chemical is classified
as a hazardous waste.
US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3.
Additionally, waste generators must consult state and local hazardous waste regulations to
ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.
|
Section 14 - Transport Information
|
| |
US DOT |
Canada TDG |
| Shipping Name: |
DIISOPROPYLAMINE |
No information available. |
| Hazard Class: |
3 |
|
| UN Number: |
UN1158 |
|
| Packing Group: |
II |
|
|
Section 15 - Regulatory Information
|
US FEDERAL
TSCA
CAS# 108-18-9 is listed on the TSCA inventory.
Health & Safety Reporting List
None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
None of the chemicals in this product have a TPQ.
SARA Codes
CAS # 108-18-9: immediate, fire, sudden release of pressure.
Section 313
No chemicals are reportable under Section 313.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product
are listed as Hazardous Substances under the CWA.
None of the chemicals in this
product are listed as Priority Pollutants under the CWA.
None of the chemicals in this
product are listed as Toxic Pollutants under the CWA.
OSHA:
None of the chemicals in this product
are considered highly hazardous by OSHA.
STATE
CAS# 108-18-9 can be found on the
following state right to know lists: California, New Jersey,
Pennsylvania, Minnesota, Massachusetts.
California Prop 65
California No Significant Risk Level:
None of the chemicals in this product are listed.
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols:
F C
Risk Phrases:
R 11 Highly flammable.
R 20/22 Harmful by inhalation and if swallowed.
R 34 Causes burns.
Safety Phrases:
S 16 Keep away from sources of ignition - No smoking.
S 26 In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves and eye/face pr
otection.
S 45 In case of accident or if you feel unwell, seek medical advice
immediately (show the label where possible).
WGK (Water Danger/Protection)
CAS# 108-18-9: 2
Canada - DSL/NDSL
CAS# 108-18-9 is listed on Canada's DSL List.
Canada - WHMIS
This product has a WHMIS classification of B2, E.
This product has been classified in accordance with the hazard
criteria of the Controlled Products Regulations and the MSDS
contains all of the information required by those regulations.
Canadian Ingredient Disclosure List
CAS# 108-18-9 is listed on the Canadian Ingredient Disclosure List.
|
Section 16 - Additional Information
|
MSDS Creation Date: 9/02/1997
Revision #4 Date: 10/03/2005
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no event shall Fisher be liable
for any claims, losses, or damages of any third party or for lost profits
or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if Fisher has been advised of
the possibility of such damages.