PPG INDUSTRIES INC COATINGS & RESINS GROUP -- DX77 FISH EYE PREVENTER -- 8010-00F052342 
=====================  Product Identification  =====================

Product ID:DX77 FISH EYE PREVENTER
MSDS Date:10/12/1993
FSC:8010
NIIN:00F052342
=== Responsible Party ===
Company Name:PPG INDUSTRIES INC COATINGS & RESINS GROUP
Address:4325 ROSANNA DR
Box:9
City:ALLISON PARK
State:PA
ZIP:15101-5000
Country:US
Info Phone Num:412-492-5555
Emergency Phone Num:304-843-1300
CAGE:DO542
=== Contractor Identification ===
Company Name:PPG INDUSTRIES INC. COATINGS & RESINS GP
Address:4325 ROSEANNA DR PO BOX 9
Box:9
City:ALLISON PARK
State:PA
ZIP:15101
Phone:412-492-5555
CAGE:DO542

=============  Composition/Information on Ingredients  =============

Ingred Name:XYLENE, DIMETHYLBENZENE, XYLOL     (IARC - GROUP 3)  *96-3*
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 95-100%
Other REC Limits:100 PPM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM, SKIN
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:FILM FORMERS, RESINS, AND ADDITIVES

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL/FATAL. EYES: CAUSES
    IRRITATION. SKIN: MODERATE IRRITANT. INHALATION: HARMFUL. VAPOR
    IRRITATES EYES, NOSE & THROAT. MAY CAUSE IRRITATION OF THE
    RESPIRATORY SYSTEM, CAUSE PERMANENT BR AIN & NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, EYE WATERING, HEADACHES, NAUSEA,
    DIZZINESS, LOSS OF COORDINATION, REDNESS, ITCHING, BURNING
    SENSATION, VISUAL DISTURBANCES, DRYNESS/CRACKING/SWELLING OF SKIN

=======================  First Aid Measures  =======================

First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH IMMEDIATELY
    W/PLENTY OF WATER FOR 15 MINS. SKIN: FLUSH IMMEDIATELY W/PLENTY OF
    WATER FOLLOWED BY WASHING W/SOAP & WATER. INHALATION: REMOVE TO
    FRESH AIR.	APPLY CPR & OTHER SUPPORTIVE MEASURES. OBTAIN MEDICAL
    ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:80F
Lower Limits:1.1
Extinguishing Media:CO2, DRY CHEMICAL/UNIVERSAL AQUEOUS FILM FORMING
    FOAM DESIGNED TO EXTINGUISH FLAMMABLE LIQUID FIRES.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, WATER SPRAY
    MAY BE USED TO COOL CLOSED CONTAINERS. IF WATER IS USED, FOG
    NOZZLES ARE PREFERRED. WEAR SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT. ISOLATE FROM HOT SURFACES/IGNITION
    SOURCES. TOXIC GASES MAY FORM. KEEP CONTAINERS TIGHTLY CLOSED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PROPERLY
    EQUIPPED PERSONNEL SHOULD BE PERMITTED IN THE AREA. REMOVE ALL
    IGNITION SOURCES. TAKE UP W/SAWDUST, VERMICULITE/OTHER ABSORBENT
    MATERIAL & PLACE INTO CONTAIN ERS FOR DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
    QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
    CLASS IB FLAMMABLE LIQUIDS.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID
    FREE FALL OF LIQUIDS IN EXCESS OF A FEW INCHES. INTENTIONAL MISUSE
    BY DELIBERATELY CONCENTRATING & INHALING THE CONTENTS CAN BE
    HARMFUL/FATAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED (TC-23C) AIR
    PURIFYING/AIR SUPPLIED (TC-19C) RESPIRATORS. READ INSTRUCTIONS TO
    DETERMINE WHICH RESPIRATOR IS EFFECTIVE & HOW IT IS FITTED.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST TO KEEP CONCENTRATION
    1
Spec Gravity:0.87
Evaporation Rate & Reference:(BU O AC=100): 63
Solubility in Water:0%
Appearance and Odor:NON-VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF THE
    SOLVENTS
Percent Volatiles by Volume:99.1

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS/STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, ELECTRICAL EQUIPMENT, SPARKS, OPEN
    FLAMES, HOT SURFACES & OTHER IGNITION SOURCES
Hazardous Decomposition Products:WHEN HEATED: CO

====================  Disposal Considerations  ====================

Waste Disposal Methods:EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
    THROUGH AN APPROVED WASTE MANAGEMENT FACILITY. DISPOSE OF
    IAW/LOCAL, STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.