ASHLAND CHEMICAL CO -- BRAKE FLUID DOT 3 -- 9150-00-231-9071
===================== Product Identification ===================== Product ID:BRAKE FLUID DOT 3 MSDS Date:02/10/1995 FSC:9150 NIIN:00-231-9071 === Responsible Party === Company Name:ASHLAND CHEMICAL CO Box:2219 City:COLUMBUS State:OH ZIP:43215 Country:US Info Phone Num:614-790-3333 Emergency Phone Num:614-790-3333 CAGE:34897 === Contractor Identification === Company Name:ASHLAND CHEMICAL CO Box:2219 City:COLUMBUS State:OH ZIP:43216-2219 Country:US Phone:614-790-3333/800-274-5263 CAGE:34897 Company Name:CHEMICAL SPECIALISTS AND DEVELOPMENT INC Address:2210 HACKBERRY LN Box:687 City:CONROE State:TX ZIP:77305 Country:US Phone:409-756-1065 CAGE:4N760 ============= Composition/Information on Ingredients ============= Ingred Name:TRIETHYLENE GLYCOL MONOBUTYL ETHER CAS:143-22-6 Fraction by Wt: 44-54% Other REC Limits:NONE RECOMMENDED Ingred Name:DIETHYLENE GLYCOL MONOBUTYL ETHER CAS:112-34-5 RTECS #:KJ9100000 Fraction by Wt: 16-26% Other REC Limits:NONE RECOMMENDED Ingred Name:DIETHYLENE GLYCOL CAS:111-46-6 RTECS #:ID5950000 Fraction by Wt: 5-15% Other REC Limits:NONE RECOMMENDED Ingred Name:DIETHYLENE GLYCOL MONOPROPYL ETHER CAS:6881-94-3 Fraction by Wt: 0-10% Other REC Limits:NONE RECOMMENDED Ingred Name:DIETHYLENE GLYCOL MONOETHYL ETHER CAS:111-90-0 RTECS #:KK8750000 Fraction by Wt: 0-7% Other REC Limits:NONE RECOMMENDED Ingred Name:TRIETHYLENE GLYCOL MONOETHYL ETHER CAS:112-50-5 Fraction by Wt: 0-7% Other REC Limits:NONE RECOMMENDED ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:EYES: MAY CAUSE IRRITATION. SKIN: PROLONGED OR REPEATED CONTACT CAN CAUSE MODERATE IRRITATION, DEFATTING, DERMATITIS. INHALATION: NONE CURRENTLY KNOWN. INGESTION: MAY CAUSE GASTROINTESTINAL IRRITATION . ORAL TOXICITY IS LOW. Effects of Overexposure:EYES: IRRITATION. SKIN: IRRITATION, DEFATTING, DERMATITIS. INHALATION: NONE CURRENTLY KNOWN. INGESTION: GASTROINTESTIONAL IRRITATION. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. IF IRRITATION PERSISTS GET MEDICAL ATTENTION. SKIN: WASH AREA WITH SOAP AND WATER. INHALATION: MOVE TO FRESH AIR. INGESTION: DRINK 2 GLASSES OF WATER. INDUCE V OMITING. GET MEDICAL ATTENTION. ===================== Fire Fighting Measures ===================== Flash Point Method:COC Flash Point:250F,121C Extinguishing Media:ALCOHOL FOAM, WATER FOG, CARBON DIOXIDE, DRY CHEMICAL. Fire Fighting Procedures:WATER OR FOAM MAY CAUSE FROTHING WHICH CAN BE VIOLENT AND ENDANGER THE LIFE OF THE FIREFIGHTER, ESPECIALLY IF SPRAYED INTO CONTAINERS OF HOT, BURNING LIQUID. Unusual Fire/Explosion Hazard:WATER OR FOAM MAY CAUSE FROTHING WHICH CAN BE VIOLENT AND ENDANGER THE LIFE OF THE FIREFIGHTER, ESPECIALLY IF SPRAYED INTO CONTAINERS OF HOT, BURNING LIQUID. ================== Accidental Release Measures ================== Spill Release Procedures:ABSORB SMALL SPILLS WITH ABSORBENT MATERIAL. DIKE LARGE SPILLS TO PREVENT RUN-OFF TO SEWERS, STREAMS OR OTHER BODIES OF WATER. PUMP LIQUID TO SALVAGE TANK. ABSORB RESIDUE WITH ABSORBENT. DEPOSITE WAST E IN PROPER CONTAINERS FOR DISPOSAL. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:STORE IN WELL VENTILATED AREA AWAY FROM IGNITION SOURCE AND STRONG OXIDIZING AGENTS. PROTECT FROM PHYSICAL DAMAGE. KEEP CONTAINERS CLOSED. Other Precautions:CONTAINERS OF THIS MATERIAL MAY BE HAZARDOUS WHEN EMPTIED. EMPTIED CONTAINERS RETAIN PRODUCT RESIDUES (VAPOR, LIQUID, SOLID). NEVER USE WELDING OR CUTTING TORCH ON OR NEAR THESE CONTAINERS BECAUSE PRO DUCT OR RESIDUE CAN IGNITE EXPLOSIVELY. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE. Ventilation:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE. Protective Gloves:NOT REQUIRED UNDER NORMAL USE. Eye Protection:SAFETY GLASSES RECOMMENDED. Other Protective Equipment:WEAR NORMAL WORK CLOTHING COVERING ARMS AND LEGS. Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING, DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. Supplemental Safety and Health ================== Physical/Chemical Properties ================== HCC:V6 Boiling Pt:B.P. Text:401F,205C Spec Gravity:1.036 Evaporation Rate & Reference:<1 (ETHER=1) Appearance and Odor:CLEAR AN COLORLESS LIQUID. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES AVOID CONTACT WITH STRONG OXIDIZING AGENTS. Stability Condition to Avoid:NEVER USE WELDING OR CUTTING TORCH ON OR NEAR DRUM (EVEN EMPTY) BECAUSE PRODUCT (EVEN RESIDUE) CAN IGNITE EXPLOSIVELY. Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CARBON DIOXIDE, CARBON MONOXIDE, VARIOUS HYDROCARBONS, ETC. Conditions to Avoid Polymerization:CANNOT OCCUR. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS. IF A RUN-OFF TO SEWERS, STREAMS OR OTHER BODIES OF WATER, NOTIFY PROPER AUTHORITIES AS REQUIRED. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.