PLASTI-KOTE CO INC -- INDUSTRIAL HIGH HEAT ENGINE ENAMEL, 2932N -- 8010-00N053438 
=====================  Product Identification  =====================

Product ID:INDUSTRIAL HIGH HEAT ENGINE ENAMEL, 2932N
MSDS Date:06/08/1993
FSC:8010
NIIN:00N053438
=== Responsible Party ===
Company Name:PLASTI-KOTE CO INC
Address:1000 LAKE RD
City:MEDINA
State:OH
ZIP:44258
Country:US
Info Phone Num:216-725-4511
Emergency Phone Num:216-725-4511
CAGE:07778
=== Contractor Identification ===
Company Name:PLASTI-KOTE CO INC
Address:1000 LAKE ROAD
City:MEDINA
State:OH
ZIP:44256
Phone:(216) 725-4511
CAGE:07778
Company Name:TEMPO PRODUCTS CO A PLASTI-KOTE CO INC
Address:1000 LAKE ROAD
Box:City:MEDINA
State:OH
ZIP:44256
Country:US
Phone:330-725-4511
CAGE:07708

=============  Composition/Information on Ingredients  =============

Ingred Name:ACETONE  (SARA III). VP:186 @ 20C.
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 35-45%
OSHA PEL:1000 PPM
ACGIH TLV:750 PPM;1000 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ETHYL ALCOHOL; (ETHANOL). VP:40 @ 20C.
CAS:64-17-5
RTECS #:KQ6300000
Fraction by Wt: 5-10%
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM

Ingred Name:PROPIONIC ACID, 3-ETHOXY-, ETHYL ESTER; (ETHYL, 3-ETHOXY
    PROPIONATE). VP:0.67 @ 20C.
CAS:763-69-9
RTECS #:UF3325000
Fraction by Wt: 5-10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:2-BUTANONE; (METHYL ETHYL KETONE) (MEK)  (SARA III). VP:70
    @ 20C.
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 0-5%
OSHA PEL:200 PPM
ACGIH TLV:200 PPM;300 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:XYLENE  (SARA III). VP:5.1 @ 20C.
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 5-10%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM;150 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:HYDROCARBON PROPELLANT; (LIQUIFIED PETROLEUM GAS,
    SWEETENED) (PROPANE-ISOBUTANE MIXTURE)
CAS:68476-86-8
Fraction by Wt: 23%
OSHA PEL:1000 PPM (MFR)
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:EXCESSIVE INHAL OF VAPS
    CAN CAUSE NASAL & RESP IRRIT, DIZZ, WEAKNESS, FATG, NAUS, HDCH,
    POSS UNCON & EVEN ASPHY. EYE CONT:CAN CAUSE SEV IRRIT, REDNESS,
    TEARING, BLURRED VISION. INGEST:CAN  CAUSE GI IRRIT, NAUS, VOMIT,
    DIARR. SKIN CONT:CAN CAUSE IRRIT FOR SOME PERSONS. CHRONIC:REPORTS
    HAVE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:ASSOC RPTD & PRLNG OCCUP OVEREXP TO
    SOLVS W/PERM BRAIN & NERV SYS DMG. SEV OVEREXP IN LAB ANIMALS HAS
    ALSO CAUSED LIVER ABNORMS & DMG TO KIDNEYS, LUNGS & SPLEEN, HEART &
    ADRENALS. INTENTIONAL  MISUSE BY DELIB CONCENTRATING & INHALING
    CONTENTS MAY BE HARMFUL/FATAL.
Medical Cond Aggravated by Exposure:CAN CAUSE RESPIRATORY &/OR SKIN
    REACTION.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE INDIVIDUAL TO FRESH AIR. IF BRTHG IS DFCLT,
    ADMIN OXYGEN. IF BRTHG IS STOPPED, GIVE ARTF RESP & SEEK MED HELP.
    EYES:FLUSH W/WATER FOR AT LST 15 MINS WHILE HOLDING EYELIDS OPEN.
    INGEST:DO  NOT INDUCE VOMIT (ASPIR OF MATL INTO LUNGS CAN CAUSE
    PNEUM, WHICH CAN BE FATAL). KEEP PERSON WARM, QUIET & GET MED
    ATTN/POIS CTL CTR. SKIN:WASH W/SOAP & WATER/VARIOUS HAND CLEANERS &
    WASH CLOTHING.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:0F,-18C
Lower Limits:1%
Extinguishing Media:ALCOHOL FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
    WATER SPRAY MAY BE INEFT. WATER MAY BE USED TO COOL CLSD CNTNRS TO
    PVNT PRESS BUILD & POSS AUTOIGNIT(SUPDAT)
Unusual Fire/Explosion Hazard:CLSD CNTNRS MAY EXPLODE &/OR AUTOIGNITE
    WHEN EXPOS TO EXTREME HEAT, VAPS ARE HVR/AIR & MAY TRAVEL ALONG
    GROUND/MAY BE MOVED BY VENT & IGNITED BY PILOT (SUPDAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES, VENTILATE
    AREA. ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR ABSORBENT OR OTHER
    ABSORBENT MATERIAL & TRANSFER TO A CLOSED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT PUNCTURE OR INCINERATE. DO NOT
    STORE IN AREAS >120F OR IN DIRECT SUNLIGHT OR NEAR HEAT OR FLAMES.
Other Precautions:STORE LARGE QUANTITIES IN BUILDING PROTECTED FOR
    STORAGE OF FLAMMABLE LIQUIDS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:FOR CASUAL/OCCUP USE:TO AVOID BRTHG VAPS/SPRAY
    MIST, OPEN WINDOWS & DOORS/USE OTHER MEANS TO ENSURE FRESH AIR
    ENTRY DURING APPLICATION & DRYING. IF YOU EXPER EYE WATERING,
    HDCH/DIZZ, INCR FRESH AIR, W EAR NIOSH/MSHA APPRVD RESP PROT
    (SUPDAT)
Ventilation:FOR REGULAR/CONTINUOUS USE:PROVIDE SUFFICIENT MECH (GEN)
    &/OR LOC EXHST VENT TO MAINTAIN EXPOS BELOW TLVS.
Protective Gloves:CHEM RESIST GLOVES SUCH AS NEOPRENE.
Eye Protection:CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:WHERE SPECIAL OR UNUSUAL CONDITIONS EXIST,
    SEEK EXPERT ASSISTANCE OF AN INDUSTRIAL HYGIENIST.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM, AS
    W/ALL CHEMICALS, MINIMIZE PERSONAL CONTACT.
Supplemental Safety and Health
SUPP DATA:0.934-0.958 . FIRE FIGHT PROC:OR EXPLO WHEN EXPOS TO EXTREME
    HEAT. IF WATER IS USED, FOG NOZZ ARE PREF. EXPLO HAZ:LIGHTS, OTHER
    FLAMES, SPKS, HEATERS, SMOKING, ELEC MOTORS/OTHER LOCATI ONS DIST
    FROM MATL HNDLG POINT. RESP PROT:(TC23C/EQUIV), OR LEAVE THE AREA.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>133F,>56C
Melt/Freeze Pt:M.P/F.P Text:>1500F,>816
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:SUPP DATA
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:SLIGHT TO MODERATE
Appearance and Odor:TYPICAL SOLVENT PAINT.
Percent Volatiles by Volume:80-90

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS & OPEN FLAME.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CARBON
    DIOXIDE/CARBON MONOXIDE, VARIOUS HYDROCARBONS, NITROGEN COMPOUNDS,
    ETC WHEN BURNED.

====================  Disposal Considerations  ====================

Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE
    DEPOSITED IN A POSTED TOXIC SUBSTANCES LANDFILL I/A/W LOCAL, STATE
    & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.