CRC Dry Moly Lube
Manufacturer Information
Name
CRC Industries, Inc.
Address
885 Louis Drive
Warminster, 18974
Phone
800-424-9300
Effective Date
2016-04-06
Pictogram
NFPA
2
4
0
HMIS
Health |
2 |
Flammability |
4 |
Physical Hazard |
0 |
Personal Protection |
B |
Signal Word
Danger
Hazard Statements
- Extremely flammable aerosol. Contains gas under pressure; may explode if heated. May be fatal if swallowed and enters airways. Causes serious eye irritation. May cause respiratory irritation. May cause drowsiness or dizziness. Suspected of damaging the unborn child. May cause damage to organs (brain,nervous system) thorough prolonged or repeated exposure. Harmful to aquatic life. Harmful to aquatic life with long lasting effects.
Precautionary Statements
- Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat, sparks, open flames and/or hot surfaces. No smoking. Do not spray ona an open flame or other ignition source. Pressurized container: Do not pierce or burn, evan after use. Do not apply while equipment is energized. Extinguish all flames, pilot lights and heaters. Vapors will accoumulate readly and may ignite. Use only with adequate venitlation; maintain venitilation during use and until all vapors are gone. Open doors and windows or use other means to ensure a fresh air supply during use and while product is drying. If you experience any symptoms listed on this label, increase ventilation or leave the area. Do not breath mist or vapor. Wear protective gloves/protective clothing/eye protection/face protection. Wash thoroughly after handling. Avoid release to the environment .
ANTELOPE VALLEY COMMUNITY COLLEGE DISTRICT Local data
- SKU #
*This local data is shared by all revisions